History

HistoryModems were first introduced as a part of the SAGE air-defense system in the 1950s, connecting terminals located at various airbases, radar sites and command-and-control centers to the SAGE director centers scattered around the US and Canada. SAGE ran on dedicated communications lines, but the devices at either end were otherwise similar in concept to today's modems. IBM was the primary contractor for both the computers and the modems used in the SAGE system. A few years later a chance meeting between the CEO of American Airlines and a regional manager of IBM led to a "mini-SAGE" being developed as an automated airline ticketing system. In this case the terminals were located at ticketting offices, tied to a central computer that managed availability and scheduling. The system, known as Sabre, is the distant parent of today's SABRE system.
By the early 1960s commercial computer use had bloomed, due in no small part to the developments above, and in 1962 AT&T released the first commercial modem, the Bell 103. Using frequency-shift keying, where two tones are used to represent the 1's and 0's of digital data, the 103 had a transmission rate of 300 bit/s. Only a short time later they released the Bell 212, switching to the more reliable phase-shift keying system and increasing the data rate to 1200 bit/s. The similar Bell 201 system used both sets of signals (send and receive) on 4-wire leased lines for 2400 bit/s operation.